Asrock memory not installed 55

Crap Daddy said:. Seems like mobo is problem I have tried with single ram, in all slots only slots a1, and a2 working slots b2,b1 not working. Joined Mar 2, Messages 1, 0. I have the G-Skill Snipers believe they might be identical with shorter heat spreaders and this same board.

So yours should work just fine. Mine had the same error and it was the boards fault, I had a single bent CPU socket pin. Symptoms were odd, single stick would work in 3 of the memory channels, two sticks would produce the error every time.

So in all, the memory should work fine. I experienced this issue, but it was likely a one off problem. OneMoar There is Always Moar. Joined Apr 9, Messages 8, 1. Aquinus Resident Wat-man. Joined Jan 28, Messages 12, 3. If a channel as a whole isn't working and there are no physical deformities you can see on the motherboard it could be a channel on the IMC on your processor, but I would guess that it is the motherboard before that.

Problem solved Hey you guys are right. The problem was with the mobo socket, I took my proccy out of mobo today. To check the cpu socket. What i found was a bent pin.

I carefully made the pin straight. Now all four ram slots working fine. No i am running my rams on slot a1 and b1. Thanks a lot guys. For everyone who planing to buy Asrock z77 Extreme : I searched online everyhwere. What should I do? How could I solve this problem?

Question : I want to install onboard audio driver on my P4i45GV. Question : After updating Windows XP to service pack 2, some benchmark or programs may not work properly. What's going on? What should I do now? How could I improve it? How do I enable this function? Question 47 : I'm using P4i45PE now. Question : I'm using P4i45PE now. All rights reserved. Information published on ASRock.

Terms of Use Notice Privacy Policy. Problem related to memory, VGA card or other devices. Problem related to memory. If the problem still exists, please install only one memory module or try using other memory modules.

The Memory could not be detected. Please re-install the memory and CPU. Problem related to PCI-E devices. Please re-install PCI-E devices or try installing them in other slots. Please re-install the CPU and memory. Battery back in. CMOS resset button for slow count of Make sure when you add the single RAM stick you listen for two distinct clicks and place the RAM in parallel to the board.

If you still get 55 try with some totally different DDR3 again one stick. Post back how this goes. I have swapped out 3 sets of memory to test as well. Have you come to the conclusion that your MB is bad? I've tried to ClrCmos, to update bios, to GoButton,to check Cpu socket pins but all ok, to put only one in the A2 first but don't work. Only on the Dimm Slot B1 and B2. I don't know what to do??