2000 installation server window

Other than the PXE-compliant network adapters, neither the client nor server requirements should pose much of a problem. Alternatively, the NIC may be compatible with the optional RIS boot disk, but the list of compatible adapters is a short one. This section will guide you through a basic installation of RIS on a Windows file server. The Windows Components Wizard allows you to add or remove Windows components as desired.

Figure A. Figure D If necessary, you can set the server to begin supporting clients immediately. The default is to configure client support after setup. Provide a workgroup or domain name. Select workgroup and type class. Click Finish to restart the computer. Configure the network ID for the computer. In this wizard, you do either of the following.

When a user starts the computer, Windows automatically logs on using the configured user name and password. When a user starts the computer, the Log On to Windows dialog box appears.

Installing Network Components 4. Configuring the Server To install Windows Advanced Server from a compact disc, you must load the Operating System from a compact disc or from the Setup disks, and then complete the Setup wizard. With the exception of the optional components, the information you provide during an installation of Windows Advanced Server is the same as the information you provide during an installation of Windows Professional. In addition, with Windows Advanced Server, you are provided the option to further configure the server after the installation finishes by using the Configure Your Server wizard.

Completing the Setup Wizard After running the text-based portion of the Setup program, complete the Setup wizard by providing the following information: 1. Refer to Windows Professional Installation. Enter your name and organization.

Select a licensing mode. Choose per server 20 computers. Select the Windows optional components. The components you choose are determined by how you intend to use your server. Set the date, time, and time zone settings. This option is available only in Sysprep 1. The command issues a stop command through Service Control Manager; any device that does not have hardware present responds to the command. This is useful for auditing the system and verifying that Mini-Setup is operating correctly.

This prevents sysprep from shutting down the machine. For example, an OEM deploying many machines may pull out every th machine and conduct an audit to verify that it's been built correctly. Rather then redeploy, they can use the -nosidgen switch to reset the machine, and place it back in the deployment pool.

This option prevents that box. But I don't use it because too many things can go wrong. LSAs are used by the receiving routers to maintain their routing tables. The user is prompted to press F12 to initate service from the selected RIS server. Optionally, the client can request a credentials file. Otherwise, it will be shut down as a roque server. INF file entries Comsetup. The Windows WebRing. All rights reserved. Privacy Policy Last updated. Topics this page: Minimum Configurations Upgrading Prep.

Installing Windows Servers. Site M ap About th i s site Enter your search terms Submit search form. This page provides a concise but yet deep step-by-step instructions to automate installation of Microsoft Windows , , , with links to other tips, tricks, and tweaks.

Preparations of Ingredients What to do before sitting down in front of the server: Machine Names How many servers and what are the names of the servers? A medium sized shop would typically have: An internal file server inside the DMZ to handle intranet traffic. An external web server outside the DMZ to handle customer activity.

Microsoft Keyboard Tricks. Drivers The three types of drivers are: vendor-supplied device drivers. Here's a translation table: Store Properties MB. Alternatives for Automating Installations Bootable Diskettes is the most labor intensive approach.

The default DriverSigningPolicy is Warn. Licensing Mode The "Per Server. If No, Internet Explorer is configured set by values in the Branding. VGA Modes. Cloning with Sysprep. Forces the system to shutdown in the case where the system will not do so normally after running Sysprep. Disables any boot devices that were loaded by the [SysprepMassStorage] section in the Sysprep. Next, click the Set button, followed by the OK button. When Windows asks you to reboot the computer, do so.

SYS file from the root directory. This will help to optimize the migration process and will also help you to spot any hard disk problems before beginning the migration. You may then remove the temporary domain controller from the domain. There are two different methods that I commonly use. Migration method number one: Back up and restore The first method involves backing up all of the data on the server.

After the change has had time to replicate, install Windows NT or Windows onto the new server whichever operating system the old server used.

Assign the new server the same IP address and computer name that your old server had. The server will be assigned a new GUID, but it will have no problem using the old server name and IP address since you've removed the old server from the network. One of the best things about using this technique is that it involves a completely fresh installation of Windows and of your applications. As long as you heed my warnings regarding domain controllers in the section above, this technique will work in single domain controller environments.

Migration method number two: Parallel migration The second migration technique is a bit more complex, but it works well in single domain controller environments as well as more complex servers, such as application servers Exchange, SQL, etc.

This technique has two advantages over the previous method. First, your old server remains untouched.